# You can configure here the sensors
# Format is <sensors_name>=<command>!<high threshold>!<low threshold>!<sensor type>
# An alert is triggerd if the temperature is above the high threshold
# The alert is cleared if the temperature is less than low threshold
# the last field (sensor type) is optional and defaults to temp
# It's used if you want to monitor other sensors, like fan, or power
# Example:
#
#
## Examples with ipmitool
# cpu0 = /usr/bin/ipmitool sdr get 'P1 Therm Margin' | grep 'Sensor Reading' | cut -d':' -f 2 | awk '{print$1}'!-30!-39
# mb = /usr/bin/ipmitool sdr get 'Baseboard Temp' | grep 'Sensor Reading' | cut -d':' -f 2 | awk '{print$1}'!50!45
#
# fan1 = fan1a=/usr/bin/ipmitool sdr get 'Fan1A RPM' | grep 'Sensor Reading' | cut -d':' -f 2 | awk '{print$1}'!0!0!fan
# pwr1=/usr/bin/ipmitool sdr get 'Pwr Consumption' | grep 'Sensor Reading' | cut -d':' -f 2 | awk '{print$1}'!0!0!power
#
## Examples with smartctl
# sda = /usr/sbin/smartctl -a /dev/sda | grep Temperature_Celsius | awk '{print $10}'!45!40
# sdb = /usr/sbin/smartctl -a /dev/sdb | grep Temperature_Celsius | awk '{print $10}'!45!50
#
## Examples with lm_sensors
# cpu0=/usr/bin/sensors | grep temp1 | cut -d':' -f 2 | awk '{print $1'} | sed -e "s/+//g" -e "s/.C//g"!65!55
#
## Examples with acpi
# cpu0=cat /proc/acpi/thermal_zone/THRM/temperature | awk '{print $2}'!65!55
#
#
# !!! WARNING !!!
# All the commands will be executed with root privileges