Nettoyage des templates, et compat version 2.0

root/etc/e-smith/db/configuration/defaults/zabbix-agent/ServerPort

@@ -1 +0,0 @@
-10051

root/etc/e-smith/db/configuration/defaults/zabbix-agent/active

@@ -1 +0,0 @@
-enabled

root/etc/e-smith/db/configuration/defaults/zabbix-agent/passive

@@ -1 +0,0 @@
-disabled

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/00header

@@ -1,6 +0,0 @@
-# This is config file for zabbix_agentd
-# To get more information about ZABBIX, go http://www.zabbix.com
-
-############ GENERAL PARAMETERS #################
-
-

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/10zabbixServers

@@ -1,12 +1,2 @@
-# List of comma delimited IP addresses (or hostnames) of ZABBIX servers. 
-# No spaces allowed. First entry is used for sending active checks.
-# Note that hostnames must resolve hostname->IP address and
-# IP address->hostname.
-
 Server={ (${'zabbix-agent'}{'Servers'} || '127.0.0.1'); }
 
-# Server port for sending active checks
-
-ServerPort={ (${'zabbix-agent'}{'ServerPort'} || '10051'); }
-
-

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/20listen

@@ -1,12 +1,11 @@
-# Listen port. Default is 10050
-
 ListenPort={ (${'zabbix-agent'}{'TCPPort'} || '10050'); }
+{
+my $access = ${'zabbix-agent'}{'access'} || 'private';
+my $listen = '127.0.0.1';
 
-# IP address to bind agent
-# If missing, bind to all available IPs
-
-#ListenIP=127.0.0.1
+$listen = $LocalIP if ($access eq 'private');
+$listen = '' if ($access eq 'public');
 
-# Source IP address for outgouing connections
-#SourceIP=
+$OUT .= "ListenIP=$listen\n" if ($listen ne '');
 
+}

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/30fork

@@ -1,7 +1 @@
-# Number of pre-forked instances of zabbix_agentd.
-# Default value is 5
-# This parameter must be between 1 and 16
-
 StartAgents=5
-
-

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/40ActiveBuffers

@@ -0,0 +1,2 @@
+BufferSend=30 
+BufferSize=100

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/40freq

@@ -1,20 +0,0 @@
-# How often refresh list of active checks. 2 minutes by default.
-
-#RefreshActiveChecks=120
-
-# Buffers parameters
-
-# Do not keep data longer than
-# N seconds in buffer.
-# Number of seconds, 1-3600.
-
-BufferSend=30 
-
-# Maximum number of values
-# in a buffer. The agent will
-# send all collected data to
-# ZABBIX Server or Proxy if
-# the buffer is full.
-
-BufferSize=100
-

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/50ActiveServer

@@ -0,0 +1,5 @@
+{
+if ((${'zabbix-agent'}{'ServerActive'} || '') ne ''){
+    $OUT .= "ServerActive=${'zabbix-agent'}{'ServerActive'}\n";
+}
+}

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/50active_passive

@@ -1,8 +0,0 @@
-# Disable active checks. The agent will work in passive mode listening server.
-
-DisableActive={ ((${'zabbix-agent'}{'active'} || 'enabled') eq 'disabled' ? '1':'0'); }
-
-# Disable passive checks. The agent wont listen TCP port
-# Set this to 1 if you use only active checks
-DisablePassive={ ((${'zabbix-agent'}{'passive'} || 'enabled') eq 'disabled' ? '1':'0'); }
-

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/60remoteCommands

@@ -1,5 +1 @@
-# Enable remote commands for ZABBIX agent. By default remote commands disabled.
-
 EnableRemoteCommands={ (${'zabbix-agent'}{'RemoteCommands'} || 'disabled') eq 'enabled' ? '1':'0'; }
-
-

root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/70logs

@@ -1,21 +1,5 @@
-# Specifies debug level
-# 0 - debug is not created
-# 1 - critical information
-# 2 - error information
-# 3 - warnings (default)
-# 4 - for debugging (produces lots of information)
-
 DebugLevel=3
-
-# Name of PID file
-
 PidFile=/var/run/zabbix/zabbix_agentd.pid
-
-# Name of log file.
-# If not set, syslog will be used
-
 LogFile=/var/log/zabbix/zabbix_agentd.log
-
-# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.
 LogFileSize=10