Convert sensors config to a ini format

Automatically migrate from the old to the new format for existing install

conf/sensors.conf

@@ -1,29 +0,0 @@
-# You can configure here the sensors
-# Format is <sensors_name>=<command>!<high threshold>!<low threshold>!<sensor type>
-# An alert is triggerd if the temperature is above the high threshold
-# The alert is cleared if the temperature is less than low threshold
-# the last field (sensor type) is optional and defaults to temp
-# It's used if you want to monitor other sensors, like fan, or power
-# Example:
-#
-#
-## Examples with ipmitool
-# cpu0 = /usr/bin/ipmitool sdr get 'P1 Therm Margin' | grep 'Sensor Reading' | awk '{print $4}'!-30!-39
-# mb = /usr/bin/ipmitool sdr get 'Baseboard Temp' | grep 'Sensor Reading' | awk '{print $4}'!50!45
-#
-# fan1 = fan1a=/usr/bin/ipmitool sdr get 'Fan1A RPM' | grep 'Sensor Reading' | awk '{print $4}'!0!0!fan
-# pwr1=/usr/bin/ipmitool sdr get 'Pwr Consumption' | grep 'Sensor Reading' | awk '{print $4}'!0!0!power
-#
-## Examples with smartctl
-# sda = /usr/sbin/smartctl -a /dev/sda | grep Temperature_Celsius | awk '{print $10}'!45!40
-# sdb = /usr/sbin/smartctl -a /dev/sdb | grep Temperature_Celsius | awk '{print $10}'!45!50
-#
-## Examples with lm_sensors
-# cpu0=/usr/bin/sensors | grep temp1 | cut -d':' -f 2 | awk '{print $1'} | sed -e "s/+//g" -e "s/.C//g"!65!55
-#
-## Examples with acpi
-# cpu0=cat /proc/acpi/thermal_zone/THRM/temperature | awk '{print $2}'!65!55
-#
-#
-# !!! WARNING !!!
-# All the commands will be executed with root privileges

conf/sensors.ini

@@ -0,0 +1,45 @@
+# This file lets you configure which sensors will be monitored by Zabbix
+# Sensors defined here will be sent to Zabbix through its low level discovery feature
+# You then have to create discovery rules and prototypes to make use of them
+#
+# This file is in ini format, each sensor has its own block and a set of key/value pair
+#
+# Example:
+#
+# [cpu0]
+# description=Temperature of the first CPU
+# threshold_high=60
+# threshold_low=50
+# cmd="/usr/bin/sensors | grep temp1 | cut -d':' -f 2 | awk '{print $1}' | sed -e 's/+//g' -e 's/.C//g'"
+# type=temp
+# unit=°C
+#
+# [mb]
+# description=Motherboard's temperature
+# threshold_high=50
+# threshold_low=45
+# cmd="/usr/bin/ipmitool sdr get 'Baseboard Temp' | grep 'Sensor Reading' | awk '{print $4}'"
+# type=temp
+# unit=°C
+#
+# [sda]
+# description=hard drive temperature
+# threshold_high=50
+# threshold_low=45
+# cmd="/usr/sbin/smartctl -A /dev/sda | grep Temperature_Celsius | awk '{print $10}'"
+# type=temp
+# unit=°C
+#
+# [fan1]
+# description=front fan
+# threshold_high=12000
+# threshold_low=1400
+# cmd="/usr/bin/ipmitool sdr get 'Fan1A RPM' | grep 'Sensor Reading' | awk '{print $4}'"
+# type=fan
+# unit=rpm
+#
+#
+# !!! WARNING !!!
+# * All the commands will be executed with root privileges
+# * If your cmd contains quotes, you must double quote the whole command
+# * If your cmd contains double quotes, you must escape them as \"

zabbix-agent-addons.spec

@@ -17,6 +17,7 @@ Requires: perl(Linux::LVM)
 Requires: perl(POSIX)
 Requires: perl(MIME::Base64)
 Requires: perl(File::Which)
+Requires: per(Config::Simple)
 
 AutoReqProv: no
 
@@ -55,6 +56,11 @@ LVM, RAID status, S.M.A.R.T. drives, BackupPC etc...
 %preun
 
 %post
+if [ $1 -eq 1 ] ; then
+  if [ -e "/etc/zabbix/sensors.conf" ]; then
+    /var/lib/zabbix/bin/util_convert_sensors_ini
+  fi
+fi
 
 %files
 %defattr(-,root,root,-)

zabbix_scripts/check_sensors_sudo

@@ -1,29 +1,32 @@
 #!/usr/bin/perl -w
 
+use strict;
+use warnings;
+use Config::Simple;
+
 my $what = $ARGV[0];
 
 unless (defined $what){
-    usage();
+  usage();
-    exit(1);
+  exit(1);
 }
 
-open SENSORS, ('</etc/zabbix/sensors.conf') ||
+my $cfg = new Config::Simple;
-    die "Couldn't open /etc/zabbix/sensors.conf: $!\n";
+$cfg->read('/etc/zabbix/sensors.ini');
 
 my $ret = 'ZBX_NOTSUPPORTED';
-
+my $sensor = $cfg->get_block($what);
-foreach (<SENSORS>){
+if ($sensor && $sensor->{cmd}){
-    next unless (/^$what(\s+)?=(\s+)?(.*)!(\-?\d+)!(\-?\d+)(!(\w+))?$/);
+  $ret = qx($sensor->{cmd});
-    my $cmd = $3;
-    $ret = `$cmd`;
 }
+
 print $ret;
 exit(0);
 
 sub usage {
     print <<"EOF";
 
-Usage: $0 sensor_name [high|low]
+Usage: $0 sensor_name
 
 EOF
 }

zabbix_scripts/disco_sensors

@@ -1,36 +1,40 @@
 #!/usr/bin/perl -w
 
-use JSON;
+use Config::Simple;
 use Getopt::Long;
+use JSON;
 
-my $sensor_type = 'temp';
+my $type = 'temp';
 GetOptions(
-  "type:s"   => \$sensor_type
+  "type:s" => \$type
 );
 
 # empty means temp
-$sensor_type = ($sensor_type eq '') ? 'temp' : $sensor_type;
+$type = ($type eq '') ? 'temp' : $type;
 
 my $json;
 @{$json->{data}} = ();
 
-open SENSORS, ('</etc/zabbix/sensors.conf') ||
+my $cfg = new Config::Simple;
-    die "Couldn't open /etc/zabbix/sensors.conf: $!\n";
+$cfg->read('/etc/zabbix/sensors.ini');
-
+my %sensors = ();
+foreach my $k (keys $cfg->vars){
+  $k =~ s/\..*$//;
+  $sensors{$k} = 1 unless $sensors{$k};
+}
 
-foreach (<SENSORS>){
+foreach my $k (keys %sensors){
-    next unless (/^(\w+)(\s+)?=(\s+)?(.*)!(\-?\d+)!(\-?\d+)(!(\w+))?$/);
+  my $sensor = $cfg->get_block($k);
-    my ($sensor,$threshigh,$threslow,$type) = ($1,$5,$6,$8);
+  next if ($type ne 'all' && $type ne $sensor->{type});
-    $type ||= 'temp';
+  push @{$json->{data}}, {
-    next if ($sensor_type ne 'all' && $type ne $sensor_type);
+    "{#SENSORNAME}"      => $k,
-    push @{$json->{data}}, {
+    "{#SENSORDESC}"      => $sensor->{description},
-        "{#SENSORNAME}"      => $sensor,
+    "{#SENSORTHRESHIGH}" => $sensor->{threshold_high},
-        "{#SENSORTHRESHIGH}" => $threshigh,
+    "{#SENSORTHRESLOW}"  => $sensor->{threshold_low},
-        "{#SENSORTHRESLOW}"  => $threslow,
+    "{#SENSORTYPE}"      => $sensor->{type},
-        "{#SENSORTYPE}"      => $type
+    "{#SENSORUNIT}"      => $sensor->{unit}
-    };
+  };
 }
-close SENSORS;
+
 print to_json($json);
 exit(0);
-

zabbix_scripts/util_convert_sensors_ini

@@ -0,0 +1,46 @@
+#!/usr/bin/env perl -w
+
+use strict;
+use warnings;
+
+use Config::Simple '-strict';
+use JSON;
+
+my $old = '/etc/zabbix/sensors.conf';
+my $new = '/etc/zabbix/sensors.ini';
+
+my $sensors = {};
+
+my $units = {
+  temp  => '°C',
+  fan   => 'rpm',
+  power => 'W'
+};
+
+open OLDSENSORS, ("<$old") ||
+    die "Couldn't open $old: $!\n";
+
+
+foreach (<OLDSENSORS>){
+    next unless (/^(\w+)(\s+)?=(\s+)?(.*)!(\-?\d+)!(\-?\d+)(!(\w+))?$/);
+    my ($sensor,$cmd,$threshigh,$threslow,$type) = ($1,$4,$5,$6,$8);
+    $type ||= 'temp';
+    $sensors->{$sensor} = {
+      description     => $sensor,
+      cmd             => $cmd,
+      threshold_high  => $threshigh,
+      threshold_low   => $threslow,
+      type            => $type,
+      unit            => $units->{$type}
+    };
+}
+
+my $cfg = new Config::Simple(syntax => 'ini');
+
+foreach my $k (keys %$sensors){
+  $cfg->set_block($k, $sensors->{$k});
+}
+
+$cfg->write($new);
+
+rename $old, $old . '.bak';