Don't WARN when device is being checked, only when it's rebuilding

zabbix_scripts/check_raid_mdadm

@@ -27,20 +27,19 @@ use Getopt::Long;
 # 
 # unused devices: <none>
 
-my $file = "/proc/mdstat";
+my $file   = "/proc/mdstat";
 my $device = "all";
 
 # Get command line options.
-GetOptions ('file=s' => \$file,
+GetOptions (
-	'device=s' => \$device,
+  'file=s' => \$file,
-	'help' => sub { &usage() } );
+  'device=s' => \$device,
+  'help' => sub { &usage() }
+);
 
 ## Strip leading "/dev/" from --device in case it has been given
 $device =~ s/^\/dev\///;
 
-## Return codes for Nagios
-my %ERRORS=('OK'=>0,'WARNING'=>1,'CRITICAL'=>2,'UNKNOWN'=>3,'DEPENDENT'=>4);
-
 ## This is a global return value - set to the worst result we get overall
 my $retval = 0;
 
@@ -50,78 +49,85 @@ my $result = 'OK';
 
 open FILE, "< $file" or die "Can't open $file : $!";
 while (<FILE>) {
-	next if ! /^(md\d+)+\s*:/;
+  next if ! /^(md\d+)+\s*:/;
-	next if $device ne "all" and $device ne $1;
+  next if $device ne "all" and $device ne $1;
-	my $dev = $1;
+  my $dev = $1;
-	push @raids, $dev;
+  push @raids, $dev;
-
+
-	my @array = split(/ /);
+  my @array = split(/ /);
-	$devs_total{$dev} = 0;
+  $devs_total{$dev} = 0;
-	my $devs_up = 0;
+  my $devs_up = 0;
-	my $missing = 0;
+  my $missing = 0;
-	for $_ (@array) {
+  for $_ (@array) {
-		$level{$dev} = $1 if /^(raid\d+)$/;
+    $level{$dev} = $1 if /^(raid\d+)$/;
-		next if ! /(\w+)\[\d+\](\(.\))*/;
+    next if ! /(\w+)\[\d+\](\(.\))*/;
-		$devs_total{$dev}++;
+    $devs_total{$dev}++;
-		if ($2 eq "(F)") {
+    if ($2 eq "(F)") {
-			$failed_devs{$dev} .= "$1,";
+      $failed_devs{$dev} .= "$1,";
-		}
+    }
-		elsif ($2 eq "(S)") {
+    elsif ($2 eq "(S)") {
-			$spare_devs{$dev} .= "$1,";
+      $spare_devs{$dev} .= "$1,";
-		}
+    }
-		else {
+    else {
-			$active_devs{$dev} .= "$1,";
+      $active_devs{$dev} .= "$1,";
-			$devs_up++;
+      $devs_up++;
-		}
+    }
-	}
+  }
-	if (! defined($active_devs{$dev})) { $active_devs{$dev} = "none"; }
+  if (! defined($active_devs{$dev})){
-		else { $active_devs{$dev} =~ s/,$//; }
+    $active_devs{$dev} = "none";
-	if (! defined($spare_devs{$dev}))  { $spare_devs{$dev}  = "none"; }
+  }
-		else { $spare_devs{$dev} =~ s/,$//; }
+  else {
-	if (! defined($failed_devs{$dev})) { $failed_devs{$dev} = "none"; }
+    $active_devs{$dev} =~ s/,$//;
-		else { $failed_devs{$dev} =~ s/,$//; }
+  }
-	
+  if (! defined($spare_devs{$dev})){
-	$_ = <FILE>;
+    $spare_devs{$dev}  = "none";
-	/(\d+)\ blocks\ (.*)(\[.*\])\s?$/;
+  }
-        $size{$dev} = int($1/1024);
+  else {
-	#print "$3\n";
+    $spare_devs{$dev} =~ s/,$//;
-	$missing = 1 if ($3 =~ m/_/);
+  }
-	if ($size{$dev} > 1024){
+  if (! defined($failed_devs{$dev})){
-		$size{$dev} = int($size{$dev}/1024)."GB";
+    $failed_devs{$dev} = "none";
-	}
+  }
-	else{
+  else {
-		$size{$dev} .= "MB";
+    $failed_devs{$dev} =~ s/,$//;
-	}
+  }
-	$_ = <FILE>;
-	if (($devs_total{$dev} > $devs_up) || ($failed_devs{$dev} ne "none") || (($missing) && (!/recovery/))) {
-		$status{$dev} = "Degraded";
-		$result = "CRITICAL";
-		$retval = $ERRORS{"CRITICAL"};
-	}
-	else {  
-                $status{$dev} = "Optimal";
-        }
-	if (/recovery|resync/){
-		$status{$dev} = "Rebuilding";
-		if ($result eq "OK"){
-			$result = "WARNING";
-	                $retval = $ERRORS{"WARNING"};
-		}
-	}
 	
-
+  $_ = <FILE>;
+  /(\d+)\ blocks\ (.*)(\[.*\])\s?$/;
+  $size{$dev} = int($1/1024);
+  $missing = 1 if ($3 =~ m/_/);
+  if ($size{$dev} > 1024){
+    $size{$dev} = int($size{$dev}/1024)."GB";
+  }
+  else{
+    $size{$dev} .= "MB";
+  }
+  $_ = <FILE>;
+
+  if (($devs_total{$dev} > $devs_up) || ($failed_devs{$dev} ne "none") || (($missing) && (!/recovery/))) {
+    $status{$dev} = "Degraded";
+    $result = "CRITICAL";
+  }
+  else {
+    $status{$dev} = "Optimal";
+  }
+  if (/(recovery|resync)\s*=\s*\d{1,2}(\.\d)?%/){
+    $status{$dev} = "Rebuilding";
+    if ($result eq "OK"){
+      $result = "WARNING";
+    }
+  }
 }
 print "$result: ";
 foreach my $raid (@raids){
-    print "$raid:$level{$raid}:$devs_total{$raid} drives:$size{$raid}:$status{$raid} ";
+  print "$raid:$level{$raid}:$devs_total{$raid} drives:$size{$raid}:$status{$raid} ";
 }
 print "\n";
 close FILE;
-exit $retval;
+exit 0;
 
 # =====
-sub usage()
+sub usage(){
-{
 	printf("
 Check status of Linux SW RAID